Used Caterpillar 826 Loader

Reading: 2156

Detailed Introduction to Caterpillar 826 Wheel Loader

The Caterpillar 826 (latest generation: 826K) is a heavy-duty wheeled loader developed and manufactured by Caterpillar Inc., the global leading provider of construction and mining equipment. It is positioned for high-intensity, long-duration heavy-load operations, and is widely recognized for its industry-leading productivity, fuel efficiency, durability and low lifecycle operating cost.

1. Core Technical Specifications

Parameter	Specification
Operating Weight	39,500 – 43,200 kg (87,082 – 95,239 lb)
Standard Bucket Capacity	3.8 – 10.7 m³ (5.0 – 14.0 yd³)
Rated Payload	10,000 – 12,500 kg (22,046 – 27,558 lb)
Gross Power	302 kW (405 hp) @ 1,800 rpm
Maximum Travel Speed	24 km/h (14.9 mph)
Straight Tipping Load	24,100 kg (53,131 lb)
Maximum Breakout Force	231 kN (51,930 lbf)
Turning Radius (at Bucket Edge)	7.2 m (23.6 ft)

2. Engine Performance

The 826 loader is equipped with a Caterpillar proprietary C13B 6-cylinder four-stroke diesel engine, compliant with the strictest global emission standards including EPA Tier 4 Final, EU Stage V and China Non-road Stage IV:

Adopts Caterpillar's patented ACERT (Advanced Combustion Emission Reduction Technology) to achieve 10% higher fuel efficiency than the previous generation 826H model, reducing fuel consumption by 8-12 L per hour under typical loading conditions.
The aftertreatment system requires no mandatory active DPF (Diesel Particulate Filter) regeneration interruptions during operation, avoiding impact on continuous work efficiency.
Supports stable power output at altitudes up to 3,000 m (9,843 ft) without derating; with optional cold-weather package, it supports normal startup at temperatures as low as -32°C (-25.6°F).

3. Powertrain & Hydraulic System

Powertrain: Electronically controlled 5-forward / 3-reverse planetary powershift transmission, with optimized gear ratio to achieve smooth shifting and minimal power interruption. Heavy-duty fully floating axles with self-adjusting wet disc brakes, providing reliable braking performance even under continuous heavy load.
Hydraulic System: Load-sensing variable displacement hydraulic system with a maximum flow rate of 380 L/min (100.4 gpm), which supplies oil on demand to reduce unnecessary energy loss by 15% compared to fixed-displacement systems. It achieves a full work cycle (boom lift + bucket dump + boom lower) in only 9.2 seconds, greatly improving truck loading efficiency. The load-sensing steering system ensures light and precise steering control even at full load.

4. Operator Comfort & Safety

Comfort: ROPS (Roll-Over Protective Structure) / FOPS (Falling Object Protective Structure) certified pressurized cab, with interior noise controlled at 72 dB(A), one of the quietest cabs in its class. It is fitted with a 12-way adjustable air-suspension heated/cooled seat, ergonomic low-effort electro-hydraulic joysticks, dual-zone automatic climate control and filtered fresh air supply, reducing operator fatigue during long shifts.
Safety: 360° panoramic visibility, standard rearview camera, optional blind spot detection and 360° surround view system to eliminate operation blind spots. Anti-slip access steps and double-sided grab handles, redundant braking system, automatic parking brake and emergency steering function ensure operator safety under all working conditions. A 10-inch high-definition touchscreen display provides real-time alerts for equipment faults and abnormal operation.

5. Serviceability & Durability

All daily inspection and service points (oil fill ports, filters, fluid level gauges) are accessible at ground level, eliminating the need to climb onto the upper frame for routine maintenance.
Extended service intervals: engine oil and filter change at 500 operating hours, hydraulic oil and filter change at 4,000 hours, reducing overall maintenance cost by 20% over the equipment lifecycle.
The articulated frame is made of high-strength wear-resistant steel, tested for over 10,000 hours of extreme heavy-load conditions, with excellent torsion and impact resistance. Optional puncture-resistant mining tires and rock guard kits further improve adaptability to harsh sites.
Integrated Cat Product Link™ remote monitoring system, which supports real-time tracking of equipment location, operating hours, fuel consumption and fault codes, predicting maintenance needs in advance and reducing unplanned downtime by up to 30%.

6. Typical Applications

The Cat 826 loader is designed for high-intensity scenarios including:

Open-pit mining and quarry operations: loading and hauling of ore, rock and overburden
Large-scale infrastructure construction: earthmoving, site preparation for highways, railways and dams
Port and logistics hubs: bulk cargo (coal, grain, ore) handling and container lifting
Waste and recycling industry: sorting and hauling of construction waste, scrap steel and municipal solid waste
Special operations: heavy snow removal, forestry log handling and industrial material stockpiling

7. Optional Configurations

Users can customize the loader according to specific working scenarios:

Work tools: general purpose bucket, rock bucket, side-dump bucket, log grapple, fork attachment, snow plow, waste handling grapple
Auxiliary systems: Cat Payload on-board weighing system (99% weighing accuracy, real-time payload monitoring to avoid overloading), automatic boom positioning system, grade control system
Adaptation packages: cold weather package, high altitude package, explosion-proof package for underground coal mines, dust suppression kit for arid regions

Non flooded

No accident

Original product

Used Caterpillar 826 Loader

RELATED PRODUCTS

Sdlg L956F

Caterpillar 826

Lonking 855N

Caterpillar 966H