Used Caterpillar 963 Loader

Reading: 2119

Detailed Introduction to Caterpillar 963 Crawler Loader

This introduction covers the latest mass-produced Caterpillar 963 (next-generation) medium crawler loader, which complies with EU Stage V / U.S. EPA Tier 4 Final emission standards, and is the latest iteration of Caterpillar's 963 product line with 30+ years of global market validation.

1. Basic Overview

Manufactured by Caterpillar Inc., the 963 is a multi-purpose medium crawler loader that combines the terrain adaptability of a crawler dozer and the loading efficiency of a wheel loader. It is designed for heavy-duty material handling, excavation, site preparation and dozing tasks in complex ground conditions where wheel loaders cannot operate stably, such as muddy sites, snow-covered areas, steep slopes and soft landfills.

2. Core Specifications

Parameter	Value
Operating Weight	18,100 – 19,500 kg (40,000 – 43,000 lb)
Engine Model	Cat C7.1 ACERT inline 6-cylinder turbocharged intercooled diesel engine
Net Rated Power	160 kW (215 hp) @ 1,800 rpm
Standard Bucket Capacity	1.9 – 3.1 m³ (2.5 – 4.1 cubic yards)
Bucket Breakout Force	185 kN (41,600 lbf)
Maximum Lift Capacity (1.2m forward of bucket pin)	7,200 kg (15,870 lb)
Travel Speed (forward/reverse)	0 – 10 km/h (0 – 6.2 mph)
Standard Track Ground Pressure	65 kPa (9.4 psi)
Fuel Tank Capacity	315 L (83.2 US gal)
Hydraulic Oil Capacity	110 L (29 US gal)

3. Core Performance Features

3.1 Powertrain System

The C7.1 engine adopts high-pressure common rail fuel injection and Caterpillar proprietary ACERT combustion technology, delivering 10% higher fuel efficiency than the previous 963K model under the same workload.
The aftertreatment system (DOC + DPF + SCR) supports automatic passive regeneration during operation, no manual shutdown for regeneration is required.
Equipped with electronically controlled hydrostatic transmission, it provides stepless speed regulation, smooth forward/reverse switching without power interruption, and standard hill-hold function to prevent sliding on slopes.

3.2 Hydraulic System

Adopts load-sensing, flow-sharing hydraulic system with maximum total pump flow of 340 L/min (89.8 gpm) and system pressure of 28,000 kPa (4,060 psi), ensuring fast, precise and synchronous movement of boom, bucket and travel system, suitable for both heavy excavation and fine grading tasks.
Hydraulic oil replacement interval is extended to 4,000 operating hours, cutting hydraulic maintenance costs by 50% compared to older generations.

3.3 Operator Comfort & Safety

The cab is ROPS/FOPS certified, with sealed pressurization design, internal operating noise as low as 72 dB(A).
Standard air-suspension adjustable seat, ergonomic electro-hydraulic (EH) joysticks (integrated control of all working and travel actions) reduce operator fatigue by 30% during long shifts.
Standard rear-view camera, optional 360° surround view system and pedestrian detection function eliminate blind spots. The 8-inch color LCD display provides real-time data of fuel consumption, fault codes and maintenance reminders.

3.4 Durability & Maintainability

All structural parts (frame, boom, bucket) are made of high-strength wear-resistant steel, optimized by finite element analysis to adapt to long-term impact loads. The sealed and lubricated heavy-duty track has a service life of over 6,000 hours under normal working conditions.
All daily maintenance points are arranged at ground-accessible positions, and the engine compartment opens at a large angle for easy inspection. Oil change interval is 500 hours, fuel filter and air filter replacement interval is 1,000 hours.
Standard Product Link™ remote telematics system supports real-time monitoring of equipment location, operating hours, working status and fault alarms, greatly facilitating fleet management.

4. Typical Application Scenarios

Construction sites: site grading, foundation excavation, construction material loading and waste transfer
Open-pit mining: ore handling, mine road maintenance and site clearing
Waste management: landfill waste spreading, compaction and transfer (low ground pressure avoids sinking in soft waste layers)
Forestry and agriculture: log loading, farmland consolidation, forage and grain handling
Emergency rescue: rubble clearing and road restoration in flood, earthquake and other disaster areas with complex terrain

5. Optional Configurations

Work tools: general purpose bucket, rock bucket, side-dump bucket, grapple, fork set, hydraulic breaker, dozer blade, ripper, log grab
Track options: wide track (ground pressure as low as 48 kPa for extremely soft terrain) / narrow track (for narrow working sites)
Custom kits: cold-weather starting kit for -40℃ environments, high-temperature cooling kit for desert areas, heated seat, Bluetooth entertainment system, collision avoidance system

The Caterpillar 963 is recognized as a benchmark in the medium crawler loader segment for its high reliability, low operating cost and Caterpillar's global after-sales service and spare parts supply network, with an industry-leading 3-year/5,000-hour structural warranty and high residual value.

Non flooded

No accident

Original product

Used Caterpillar 963 Loader

RELATED PRODUCTS

Jcb 3CX

Liugong 835

Jcb 3CX

Bobcat S300