Used Sdlg 870H Loader

Reading: 1512

Detailed Introduction of SDLG 870H Wheel Loader

SDLG (Shandong Lingong Construction Machinery Co., Ltd.), a core subsidiary of Volvo Group, is a global leading construction equipment manufacturer famous for high-reliability, cost-effective products adapted to harsh working scenarios. The 870H is a 7-ton class heavy-duty wheel loader oriented to mid-to-high end markets, tailored for high-intensity material handling, earthmoving and bulk cargo loading operations, and meets China IV, EU Stage IIIA, and U.S. Tier 3 emission standards depending on regional configurations.

1. Core Specifications

Parameter	Specific Value
Rated loading capacity	7,000 kg
Standard bucket capacity	3.5~4.5 m³ (customizable for special scenarios)
Operating weight	22,500 ~ 23,800 kg
Engine model	Weichai WP10 series heavy-duty diesel engine (calibrated with Volvo technical support)
Rated power	175 kW / 235 hp @ 2000 rpm
Max. torque	920 N·m @ 1200~1600 rpm
Transmission	Fixed-axis electro-hydraulic shifting transmission, 4 forward + 4 reverse gears
Max. travel speed	38 km/h
Max. breakout force	≥190 kN
Max. dumping height (standard boom)	3,350 mm
Max. dumping distance	1,350 mm
Min. turning radius (outer tire)	≤6,650 mm
Fuel tank capacity	300 L
Hydraulic tank capacity	180 L

2. Key Performance Advantages

2.1 High Efficiency & Low Fuel Consumption

The low-speed high-torque engine is perfectly matched with the priority flow distribution hydraulic system, reducing unnecessary energy loss by 8~10% compared with the previous generation model. The fuel consumption under typical loading conditions is only 12~15 L per hour, 15% more fuel-efficient than peer products in the same class.
The optimized working device design shortens the V-type loading cycle to 9~10 seconds, greatly improving single-shift operation efficiency.

2.2 Ultra-high Structural Durability

The front and rear frames adopt box-type high-strength steel welding structure, passing 10,000 hours of extreme heavy-load fatigue test, with strong torsion and impact resistance, suitable for long-term operation in quarries and open-pit mines.
The reinforced dual-plate lifting arm is equipped with dust-proof self-lubricating bushings at all hinge points, extending the maintenance interval by 30%. The standard bucket is made of wear-resistant NM400 steel, with a service life 2 times longer than ordinary steel buckets.

2.3 Operator Comfort & Safety

The cab is certified by ROPS (Roll Over Protective Structure) and FOPS (Falling Object Protective Structure), with full panoramic glass design, 30% wider field of view than similar products.
The interior noise is controlled below 78 dB(A), equipped with air-suspension adjustable seat with lumbar support, and electro-hydraulic control lever with only 20N operating force, greatly reducing long-term operation fatigue.
Standard configuration of high-efficiency heating and cooling air conditioning, USB charging port, large storage space, optional reversing camera, radar and anti-collision system for extra safety.

2.4 Easy Maintainability

All daily maintenance points are arranged at ground-accessible positions, with electric lift engine hood, no need to climb the vehicle for routine inspection.
Spin-on design for oil and hydraulic filters, no special tools required for replacement. The engine oil change interval is 500 hours, and the hydraulic oil change interval is 2000 hours, greatly reducing downtime and maintenance costs.
Optional SDLG intelligent telematics system, supporting real-time fault monitoring, operation data analysis and remote troubleshooting.

3. Application Scenarios & Optional Configurations

Typical Application Scenarios

Quarry & mining: Loading and transporting crushed stone, ore, matching with rock buckets and heavy-duty chassis protection kits.
Port & logistics: Bulk cargo handling, container yard leveling, coal/grain loading, matching with high-lift boom and large-capacity coal buckets.
Large infrastructure: Earthmoving, road construction material handling, site leveling.
Special industries: Log handling, agricultural bulk cargo transfer, snow removal, matching with log grapples, grass forks, snow plows and other attachments.

Common Optional Configurations

3.0m³ rock bucket, 4.5m³ coal bucket, high-lift boom (max. dumping height up to 3.8m), log grapple, grass fork, cold start kit (adapt to -35℃ low temperature), desert air filter (adapt to high-dust environment), intelligent telematics system, etc.

Summary

The SDLG 870H combines Volvo's advanced R&D technology and SDLG's localized cost advantage, and has been widely recognized by users in more than 100 countries around the world for its strong adaptability to harsh working conditions, low full-life cycle cost and high operation efficiency, making it the preferred choice for 7-ton class loader users who pursue both efficiency and cost control.

Non flooded

No accident

Original product

Used Sdlg 870H Loader

RELATED PRODUCTS

Komatsu 400-3

Komatsu 600-6

Liugong 856H

Komatsu 500-3