Used Volvo 210 Excavator

Reading: 2453

Here’s a detailed introduction to the Volvo EC210 excavator in English. (Volvo typically uses the “EC” prefix for its crawler excavators, so the model you’re referring to is the EC210 series, often called “Volvo 210” in the field.)

Volvo EC210 Crawler Excavator: Full Overview

The Volvo EC210 is a 20–22 metric ton crawler excavator designed for high productivity, excellent fuel efficiency, and low operating costs. It belongs to Volvo Construction Equipment’s mid-size excavator range and is widely used in general earthmoving, utility work, road construction, demolition, and material handling. Over the years, Volvo has released several generations (B, C, D, E, and most recently the EC210 F-series), each building on the same core strengths with advanced technology and operator comfort.

Key Highlights

Class-leading fuel efficiency from Volvo’s own engine and intelligent hydraulic system.
Outstanding lifting capacity and stability for a machine in the 20-ton class.
Superior operator environment with low noise, excellent visibility, and ergonomic controls.
Proven durability with reinforced boom, arm, and undercarriage for tough conditions.
Easy serviceability with ground-level access to filters and grouped check points.

Engine and Powertrain

The EC210 is powered by a Volvo turbocharged diesel engine that meets stringent emission standards (Tier 3 / Stage IIIA in earlier models, Tier 4 Final / Stage V in later ones). Typical specs for a late-model EC210 (such as the EC210E or EC210F) are:

Engine model: Volvo D5E (or D4E in some variants)
Net power: 123 kW (165 hp) at 1,800 rpm
Maximum torque: ~680 Nm at 1,400 rpm
Displacement: 5.1 liters
Fuel injection: Common-rail high-pressure injection
Aftertreatment: DOC+DPF+SCR (in Tier 4 Final models)

Volvo’s automatic engine-idling and engine-shutdown features reduce fuel consumption and noise when the machine is not working. The engine is designed to deliver high torque at low rpm, which means less strain, lower fuel use, and extended component life.

Advanced Hydraulic System

Volvo equips the EC210 with a sophisticated load-sensing, flow-sharing hydraulic system. The system adjusts pump output to match demand exactly, ensuring that all movements are smooth, precise, and quick – even when multiple functions are used simultaneously.

Main pumps: Two variable-displacement axial piston pumps
Maximum total flow: 2 × 200 L/min (approx.)
System pressure: 34.3 MPa (5,000 psi) for boom/arm/bucket circuits
Swing system: Independent swing pump with high torque motor
Boom and arm regeneration circuit saves energy by recycling hydraulic flow during lowering.

The result is fast cycle times, excellent controllability for fine grading, and impressive lifting power. The hydraulic system also includes boom- and arm-holding valves for safety when lifting loads.

Operator Environment

Volvo places enormous emphasis on the cab, which is one of the quietest and most comfortable in the industry.

ROPS/FOPS certified cab (Roll Over Protection Structure / Falling Object Protection Structure)
Viscous cab mounts and thick sound insulation keep interior noise below 70 dB(A)
Adjustable seat with air suspension and heating
Color LCD monitor displaying real-time fuel consumption, service intervals, camera feeds, and machine diagnostics
Joystick controls with proportional fingertip switches for attachments
Climate control with automatic temperature regulation
Excellent all-round visibility thanks to a narrow cab pillars, large glass areas, and standard rear/side-view cameras in newer models.

For hot or cold climates, the cab is fully sealed and pressurized to keep out dust, and the air conditioning system is powerful enough to maintain a comfortable working temperature in extreme conditions.

Durability and Structure

The EC210 is built to handle heavy-duty applications day after day.

Reinforced X-frame undercarriage distributes stress evenly and provides a stable base for lifting.
Heavy-duty boom and arm are made from high-tensile steel with internal baffle plates for strength and long life.
Sealed and lubricated track chains reduce internal bushing wear and extend undercarriage life.
Cast steel idlers and sprockets and triple-bar grouser shoes (typical 600 mm triple grouser) provide excellent traction and low ground pressure.
Boom foot pins and arm pins use hardened steel bushings that are easy to replace.

Volvo also offers a range of wear packages and reinforced buckets to match different working conditions.

Serviceability

To minimize downtime, the EC210 is designed for fast and safe daily maintenance.

Ground-level service access: Engine oil, fuel filters, water separator, and coolant check points are reached from the ground.
Wide-opening side doors on the upper structure give easy access to the hydraulic pumps, filters, and main control valve.
Grouped grease fittings for the boom and arm are easy to reach from the ground or a small step.
Engine hood opens vertically and can be locked securely.
On-board diagnostics through the Volvo CareTrack telematics system (optional) allow remote monitoring of fuel consumption, location, operating hours, and fault codes.

Service intervals are long: engine oil and filter every 500 hours, hydraulic oil filter every 1,000 hours, hydraulic oil every 2,000 hours (depending on conditions).

Technical Specifications (Typical EC210E / EC210F)

Specification	Value
Operating weight (with standard boom, arm, counterweight, and bucket)	20,500 – 22,000 kg
Bucket capacity	0.52 – 1.22 m³ (depending on material density)
Maximum digging depth	6,730 mm
Maximum reach at ground level	9,870 mm
Maximum dump height	6,670 mm
Digging force – bucket (SAE)	136 kN
Digging force – arm (SAE)	97 kN
Lifting capacity at 6 m reach (over front, with standard arm)	~4,400 kg
Travel speed (low / high)	3.2 / 5.5 km/h
Tail swing radius	2,850 mm
Undercarriage track shoe width	600 mm (standard)
Ground pressure	42 kPa (with 600 mm shoes)
Fuel tank capacity	340 liters

Note: Exact figures vary by configuration, counterweight, and equipment options.

Versatility and Attachments

The EC210 is compatible with a wide range of attachments, making it a true tool carrier:

Buckets (general purpose, heavy-duty, rock, ditch cleaning)
Hydraulic breakers
Grapples and sorting grabs
Tilting buckets and tiltrotators
Compaction plates
Augers
Long-reach front equipment (for long-reach versions)

The machine can be equipped with a Volvo quick coupler and a full hydraulic piping kit for attachments, all controlled directly from the joysticks. Volvo’s “Attachment Management” system remembers the hydraulic flow and pressure settings for up to 20 different attachments, making switching fast and safe.

Safety Features

Standard rear-view camera (in newer models) with a dedicated display in the cab.
Optional 360° surround-view system for maximum jobsite awareness.
Anti-slip plates on the upper structure and steps.
Emergency stop switch and easily accessible battery disconnect.
Hose burst protection valves on the boom and arm cylinders to prevent collapse in the event of a hose failure.
Seat belt warning and interlock functions.

Why Choose the Volvo EC210?

Lowest cost of ownership in its class – the fuel-efficient engine and long service intervals keep daily operating costs down.
Exceptional resale value – Volvo machines hold their value well worldwide due to reputation for reliability.
Operator appeal – the comfortable cab and intuitive controls reduce fatigue and boost productivity.
Strong dealer support – Volvo’s global network provides parts, service, and technical advice.

In short, the Volvo EC210 is a versatile, reliable, and fuel-efficient excavator that suits contractors who demand high productivity with low total cost of operation. Whether digging basements, loading trucks, or doing precise grading, the EC210 consistently delivers top performance.

Non flooded

No accident

Original product

Used Volvo 210 Excavator

RELATED PRODUCTS

Volvo 480

Volvo 210

Volvo 350

Volvo 210