Used Volvo 290 Excavator

Reading: 2671

Detailed Introduction to VOLVO EC290 Series (Volvo 290) Crawler Excavator

The VOLVO 290 excavator generally refers to the EC290 series heavy-duty crawler excavator, a flagship 28-32 ton class product developed and manufactured by Volvo Construction Equipment, a global leading manufacturer of off-road construction machinery. Renowned for its high fuel efficiency, extreme durability and precise controllability, it is one of the most popular models in its tonnage segment worldwide, suitable for both light earthmoving and heavy-duty mining/quarry operations.

1. Core Specifications

(Note: Parameters vary slightly between classic EC290BLC (Tier 3/Stage IIIA emission) and latest EC290E (Stage V/Tier 4 Final emission) versions)

Item	Specification
Operating weight	28,200 kg – 31,500 kg (depends on bucket, undercarriage and counterweight configuration)
Engine	- EC290BLC: Volvo D7E turbocharged diesel engine, rated power 153 kW @2000 rpm - EC290E: Volvo D8J low-emission diesel engine, rated power 172 kW @1800 rpm
Bucket capacity	Standard: 1.2 – 1.75 m³; Optional heavy-duty/rock bucket: 1.0 – 2.1 m³; Supports matching with hydraulic breakers, grapples and other attachments
Digging force	- Bucket breakout force: up to 197 kN (BLC) / 209 kN (E series) - Arm tearout force: up to 146 kN (BLC) / 158 kN (E series)
Working range	Max digging depth (standard arm): 7340 mm; Max horizontal reach: 10690 mm; Max dumping height: 7050 mm
Travel performance	Travel speed: 3.3/5.5 km/h; Max swing speed: 11.6 rpm; Gradeability: 35°
Hydraulic system	Volvo patented load-sensing flow-sharing hydraulic system, max system pressure 34.3 MPa

2. Core Performance Advantages

2.1 Ultra-high Fuel Efficiency

Volvo's unique high-torque low-RPM engine technology is perfectly matched with the optimized hydraulic system, delivering 10%~15% lower fuel consumption than peer products in the same tonnage class. The standard ECO mode can further reduce fuel use by up to 5% without sacrificing working efficiency, significantly lowering long-term operating costs for users. The optional power boost function provides 10% extra digging force for 10 seconds when dealing with hard rock or heavy loads.

2.2 Extreme Durability for Harsh Conditions

The X-shaped reinforced chassis and high-strength wear-resistant steel undercarriage (track links, rollers, idlers) pass 12,000 hours of extreme condition durability tests, adapting to long-term operations in rocky quarries, muddy construction sites and cold plateau environments.
The average overhaul interval of core components (engine, hydraulic pump, motor) is 20% longer than similar products, and the average fault rate is 30% lower than industry average.

2.3 Precise Controllability

The load-sensing hydraulic system realizes proportional flow distribution, supporting smooth simultaneous operation of multiple actions (boom lifting, arm retracting, swing) with almost no operation lag. It is especially suitable for fine operations such as slope trimming, pipeline laying and precision excavation.

3. Operator Comfort & Safety

The cab meets global ROPS (Roll-over Protective Structure) and FOPS (Falling Object Protective Structure) certification standards, effectively resisting rollover and falling object impact risks.
The fully adjustable ergonomic seat with lumbar support and heating function, and low-operation-force control levers reduce operator fatigue by 30% during long shifts. The fully sealed cab has a noise level as low as 74 dB(A) (E series), 3~5 dB lower than peer products.
The ultra-wide frameless front glass and thin pillar design provide a 270° panoramic view, and the standard rear camera and blind spot proximity alarm eliminate operation blind spots completely.
The 8-inch HD color display shows real-time working parameters, fault codes and maintenance reminders, and supports one-click switching of 4 working modes (ECO, Standard, Heavy, Power Boost) for different operation demands.

4. Sustainability & Maintenance Convenience

The latest EC290E complies with EU Stage V and US Tier 4 Final emission standards, with built-in SCR (Selective Catalytic Reduction) and DPF (Diesel Particulate Filter) systems, reducing NOx emissions by 90% and particulate matter emissions by 95% compared with the B series.
All daily maintenance points (engine oil port, fuel filter, air filter, hydraulic oil check port) are arranged on the ground-accessible side of the fuselage, no climbing required for routine inspection, saving 40% of daily maintenance time.
Extended service intervals: engine oil change every 500 working hours, hydraulic oil change every 5000 working hours, reducing shutdown maintenance frequency. Volvo's global 24/7 after-sales network and 2-year/3000-hour warranty for core components eliminate user worries.

5. Typical Application Scenarios

The Volvo 290 excavator is widely used in:

Large-scale earthmoving works: highway/railway subgrade construction, land reclamation, complex foundation excavation
Quarry and mining operations: ore loading, rock stripping, secondary crushing with hydraulic breakers
Municipal engineering: pipeline laying, urban demolition, waste yard operation
Water conservancy projects: reservoir dredging, river regulation, dam construction

It also has a 15%~20% higher second-hand resale value than similar products in the global construction equipment market, making it the first choice for construction contractors, mining operators and equipment leasing companies.

Non flooded

No accident

Original product

Used Volvo 290 Excavator

RELATED PRODUCTS

Volvo 300D

Volvo 240

Volvo 140

Volvo 210