Used Komatsu 200-8 Excavator

Reading: 1955

Komatsu PC200-8 Crawler Excavator Detailed Introduction

The Komatsu PC200-8 is a classic 20-ton class medium crawler excavator developed and produced by Komatsu Ltd., the global leading construction equipment manufacturer. As the core model of Komatsu's -8 series excavator lineup, it is widely recognized worldwide for its balanced performance, low operating cost and outstanding durability, and has long been one of the best-selling products in the 20-ton excavator segment.

1. Core Specifications (Standard Configuration)

Parameter	Specific Value
Operating Weight	19,800 kg – 20,500 kg (varies with bucket and track configuration)
Standard Bucket Capacity	0.8 m³ – 1.0 m³
Engine Model	Komatsu SAA6D107E-1 4-stroke turbocharged water-cooled inline 6-cylinder diesel engine
Rated Net Power	110 kW (148 HP) @ 2000 rpm
Emission Standard	EU Stage IIIA / EPA Tier 3
Max Bucket Digging Force	152 kN
Max Arm Digging Force	110 kN
Max Digging Depth	6,620 mm
Max Digging Radius	9,875 mm
Max Dumping Height	6,890 mm
Travel Speed	High: 5.5 km/h; Low: 3.1 km/h
Swing Speed	11.2 rpm
Fuel Tank Capacity	400 L
Hydraulic Tank Capacity	135 L

2. Key Performance Features

2.1 High-Efficiency & Fuel-Saving Powertrain

The self-developed SAA6D107E-1 engine is equipped with Komatsu's exclusive electronic controlled variable valve (ECMV) system and high-pressure common rail fuel injection system, which optimizes fuel combustion efficiency greatly. Compared with the previous PC200-7 model, it reduces fuel consumption by 5-10% under the same operating conditions, while maintaining strong power output under heavy load. It also comes with standard auto idle and auto shutdown functions, which cut unnecessary fuel waste during standby.

2.2 Precise & Stable Hydraulic System

It adopts Komatsu's proprietary CLSS (Closed-center Load Sensing System), which precisely matches hydraulic flow output with actual operational demand, eliminates overflow loss, and ensures smooth synchronous coordination of boom, arm, bucket and swing movements. The system greatly improves operation precision, especially suitable for fine operations such as land leveling and trenching. The hydraulic circuit is equipped with multi-level filtration devices, which effectively extends the service life of hydraulic oil and core components.

2.3 Ultra-High Structural Durability

The upper frame, lower traveling frame, boom, arm and bucket are all made of high-strength wear-resistant alloy steel, welded by industrial robots with full penetration process, and have passed 10,000 hours of extreme working condition tests. It can bear long-term impact loads in harsh sites such as quarries and small mines. The traveling system is equipped with reinforced track shoes, heavy-duty carrier rollers and buffered track tensioning devices, which greatly reduces the failure rate of the traveling mechanism.

2.4 Safe & Comfortable Operating Experience

The cab is ROPS/FOPS certified, which effectively protects operator safety in case of rollover or falling object impact. The fully sealed pressurized cab controls internal noise below 75dB, and is equipped with high-efficiency HVAC system, multi-adjustable air suspension seat, and large-area anti-glare glass for 360° good visibility. The ergonomic low-force control joystick greatly reduces operator fatigue during long-hour operation. The multi-function LCD monitor displays real-time parameters including operating status, fuel level, hydraulic oil temperature and fault codes in real time.

2.5 Low Maintenance Cost

All daily inspection and maintenance points are arranged in ground-accessible positions, no need to climb to the top of the equipment for routine check. Consumable replacement intervals are extended: engine oil replacement every 500 hours, hydraulic oil replacement every 5000 hours. The standard KOMTRAX remote monitoring system supports real-time tracking of equipment operating hours, fuel consumption, location and fault information, which helps fleet managers realize intelligent equipment management and reduce downtime.

3. Application Scenarios

The PC200-8 is highly adaptable to diversified construction needs, suitable for:

Earthwork construction of residential and commercial projects
Road and bridge construction
Municipal engineering and pipeline laying
Landscaping and site clearing
Quarrying and small-scale mining
Material handling and light demolition work

It can also be matched with a variety of auxiliary attachments including breakers, grapples, augers and rippers to expand its application range. With high residual value in the second-hand equipment market, it is a cost-effective choice for both individual contractors and large construction fleets.

Non flooded

No accident

Original product

Used Komatsu 200-8 Excavator

RELATED PRODUCTS

Komatsu 18

Komatsu 240-8

Komatsu 30

Komatsu 220-8N1