Used Hyundai 210 WHEEL Excavator

Reading: 1322

Hyundai R210W Wheel Excavator Detailed Introduction

Overview

The Hyundai R210W is a 21-ton class medium-sized wheeled excavator developed and manufactured by Hyundai Construction Equipment, a core subsidiary of Hyundai Heavy Industries Group. Designed to balance excellent on-road mobility, heavy-duty excavation performance and low operating cost, it is an ideal solution for worksites that require frequent transits and no damage to paved surfaces, filling the gap between crawler excavators (poor mobility) and dedicated loading equipment (single function).

Core Specifications (Latest R210W VS Variant, Tier 4 Final/Stage V Emission Compliant)

Item	Parameter
Operating Weight	20,800 – 21,500 kg (varies by configuration)
Engine Model	Cummins B6.7 / Hyundai HM6.4 CRDi (optional for different regions)
Rated Net Power	124 kW (166 HP) @ 2,000 rpm
Max Travel Speed	37 km/h (high speed mode) / 5.5 km/h (low speed mode)
Standard Bucket Capacity	0.92 m³ (optional range: 0.5 – 1.18 m³)
Max Swing Speed	11.7 rpm
Max Digging Depth	5,780 mm
Max Digging Reach	9,230 mm
Max Dumping Height	6,620 mm
Gradeability	70% (35°)
Fuel Tank Capacity	320 L
Hydraulic Oil Capacity	240 L

Key Performance Features

1. High-Efficiency Powertrain

The R210W is equipped with an electronic high-pressure common rail fuel injection engine, matched with Hyundai’s exclusive CAPO (Computer Aided Power Optimization) system, which dynamically matches engine output and hydraulic pump load according to real-time working conditions, reducing unnecessary fuel consumption by up to 12% compared to older generation models. It meets the latest global emission standards (Tier 4 Final / Stage V) with optimized EGR (Exhaust Gas Recirculation) and DPF (Diesel Particulate Filter) systems, suitable for low-emission restricted zones in urban areas.

2. Flexible Wheeled Chassis

Unlike crawler excavators, the R210W adopts a heavy-duty 4-wheel drive chassis, fitted with 23.5R25 off-road radial tires, supporting fast transit between worksites without the need for a flatbed trailer, greatly saving transfer time and cost. It is equipped with hydraulically assisted power steering, front and rear axle differential locks, and fully enclosed wet disc brakes, ensuring stable driving and braking performance on both paved roads and rough construction sites, and causes no damage to asphalt or concrete surfaces.

3. Precision Hydraulic System

The advanced load-sensing hydraulic system delivers smooth and precise operation, supporting smooth composite actions (simultaneous swing, boom lifting, and arm operation) with minimal delay. Operators can switch between 3 working modes (Power, Standard, Economy) freely according to operation requirements: Power mode for heavy-duty breaking and excavation, Standard mode for daily loading and trenching, Economy mode for light-duty finishing works, to achieve the best balance between efficiency and fuel consumption.

Operator Comfort & Safety

The cab is certified with ROPS (Roll Over Protective Structure) and FOPS (Falling Object Protective Structure), providing all-round safety protection for operators.
The spacious cab is equipped with a fully adjustable air-suspension seat, automatic climate control system, and ergonomic pilot control joysticks with low operating force, reducing operator fatigue during long-hour shifts.
The full-glass panoramic cab design has a narrow pillar structure, minimizing blind spots, and is fitted with a standard rearview camera and 7-inch high-definition LCD monitor, displaying real-time equipment status, fuel consumption, maintenance reminders and fault alerts clearly.
The interior sound insulation design keeps the cab noise level below 72 dB(A) during operation, providing a quiet working environment.

Durability & Maintainability

The boom, arm and chassis frame are welded with high-strength tensile steel, and subjected to strict stress relief treatment, resisting impact and twisting under heavy load conditions, with a service life extended by 20% compared to similar products.
All daily maintenance points (oil filters, air filters, fuel filters, fluid level checks) are designed to be accessible from the ground level, reducing maintenance time and safety risks of climbing the machine.
Extended service intervals: engine oil replacement every 1,000 working hours, hydraulic oil replacement every 5,000 working hours, greatly reducing long-term operating costs.
It is equipped with Hyundai’s exclusive Hi-MATE remote management system as standard, supporting remote monitoring of equipment location, working hours, fuel consumption and fault codes, helping fleet managers improve management efficiency and realize anti-theft monitoring.

Typical Application Scenarios

The R210W wheel excavator can be fitted with a variety of optional attachments (hydraulic breaker, grapple, auger, milling head, snow sweeper, etc.) to adapt to different working scenarios:

Urban municipal construction: Trenching for pipeline laying, sidewalk renovation, public facility construction, no damage to urban roads.
Road maintenance: Removal of old pavement, loading of construction waste, installation of curbstones, pothole repair.
Material handling: Loading and unloading of bulk materials, timber, scrap metal in logistics yards, ports and industrial parks.
Landscaping and agricultural construction: Site leveling, tree pit digging, water conservancy facility construction in rural areas.
Small-scale demolition: Breaking of concrete structures, old building demolition in urban areas.

Summary

The Hyundai R210W wheel excavator combines high mobility, strong excavation performance, low operating cost and high reliability, making it one of the best-selling 21-ton class wheeled excavators in the global market. Supported by Hyundai’s global after-sales service network and abundant spare parts supply, it can provide stable support for construction teams of all sizes.

Non flooded

No accident

Original product

Used Hyundai 210 WHEEL Excavator

RELATED PRODUCTS

Hyundai 305-9

Hyundai 305-9

Hyundai 215 WHEEL

Hyundai 215