Used Hitachi 130 WHEEL Excavator

Reading: 2711

Detailed Introduction of Hitachi ZX130W Wheeled Excavator

The Hitachi ZX130W is the 13-ton class mid-sized wheeled excavator flagship product developed and manufactured by Hitachi Construction Machinery, a world-leading construction equipment manufacturer. It integrates the strong excavation performance of crawler excavators and the high mobility of wheeled engineering vehicles, and is widely recognized in the global market for its high efficiency, low fuel consumption, high reliability and user-friendly design.

1. Core Technical Specifications

Parameter	Standard Configuration Data
Operating weight	12.8 – 14.2 t (varies with attachments and configuration)
Rated net power	78.5 kW / 2000 rpm
Bucket capacity	0.32 – 0.65 m³
Maximum digging depth	4720 mm
Maximum horizontal digging reach	7780 mm
Maximum dumping height	5410 mm
Bucket digging force	73 kN
Arm digging force	54 kN
Swing speed	11.5 rpm
Travel speed	5 km/h (low speed) / 35 km/h (high speed)
Gradeability	35° (70%)
Emission standard	EU Stage V / US EPA Tier 4 Final / China National IV (adjusted according to regional market requirements)

2. Core System Advantages

2.1 Powertrain System

It is equipped with the Isuzu 4JJ1X 4-cylinder water-cooled turbocharged intercooled diesel engine, which has strong power output and high reliability:

Adopts high-pressure common rail fuel injection technology, with precise fuel supply control, and the comprehensive fuel consumption is 8-10% lower than that of the previous generation of similar products
Equipped with automatic idle speed and idle shutdown functions, which automatically reduce engine speed or shut down the engine when no operation is detected, effectively reducing unnecessary fuel loss
Strong adaptability to low-quality fuel, and optional cold zone start kit supports normal start at -30℃ ambient temperature.

2.2 Hydraulic System

Adopts Hitachi's proprietary HIOS IIIB (Hitachi Integrated Operating System) load-sensing hydraulic system:

Precise flow matching control, smooth composite action (simultaneous boom lifting, arm retracting, swing and other actions have no lag or jamming), and high operation accuracy for fine work such as pipeline laying
Built-in attachment management system, which can pre-set the hydraulic flow and pressure of 3+ kinds of attachments (breaker, grapple, auger, etc.), no need to adjust parameters repeatedly when replacing attachments
Optimized hydraulic pipeline design reduces pressure loss, and the hydraulic oil replacement cycle is extended to 5000 hours, reducing maintenance costs.

2.3 Walking & Chassis System

The wheeled chassis design gives it extremely high transfer flexibility:

Selectable 2WD/4WD mode, which can be switched freely according to road conditions. The front axle has a ±10° swing function, which has strong adaptability to uneven construction sites
Hydraulic power steering, the minimum turning radius is only 4.9m, which is suitable for operation in narrow urban streets or confined spaces
Heavy-duty puncture-resistant engineering tires are standard, and optional tire protection chains are suitable for harsh construction sites with sharp gravel. It can drive directly on asphalt and cement roads without damaging the ground, and no trailer is needed for short-distance transfer, which saves transfer costs and time.

3. Operator Experience & Safety Configuration

The cab meets ROPS (Roll-over Protective Structure) and FOPS (Falling Object Protective Structure) safety certification, with multi-layer sealing design, and the indoor operating noise is lower than 70dB(A)
Equipped with multi-directional adjustable air suspension seat, automatic constant temperature air conditioning, Bluetooth audio, USB charging port and large storage space, which effectively reduces the fatigue of long-term operation
8-inch high-definition LCD display can display real-time data such as operating parameters, fuel consumption, fault warnings, etc.
Standard rear view camera, optional 360° panoramic imaging system, walking alarm, hydraulic lock anti-misoperation function, boom/arm cylinder explosion-proof valve, slope parking brake and other safety configurations, to fully protect the safety of operators and surrounding personnel.

4. Maintenance & Service Support

All daily maintenance points are arranged in the position accessible from the ground, and the replacement of oil filters, fuel filters, air filters and other consumables can be completed without climbing the car, which improves the maintenance efficiency
The boom, arm and main structural parts are welded with high-strength steel, which has passed 10,000 hours of heavy load test, and has strong impact resistance
Equipped with Hitachi Global e-Service remote monitoring system, which supports real-time viewing of equipment location, working hours, fuel consumption and other data, and provides active fault early warning, which facilitates the fleet management of contractors.

5. Application Scenarios & Optional Configurations

Typical Application Scenarios

Urban municipal maintenance, pipe network laying, landscaping, rural infrastructure construction, factory interior construction, material handling in logistics parks, emergency rescue and other scenarios that require frequent transfer and no damage to the ground.

Optional Configurations

Extended boom/arm, hydraulic quick coupler, breaker, wood grapple, auger, snow removal roller brush, 360° panoramic imaging system, heated seat, etc., to meet the needs of different operation scenarios.

Non flooded

No accident

Original product

Used Hitachi 130 WHEEL Excavator

RELATED PRODUCTS

Hitachi ZX70

Hitachi ZX350

Hitachi ZX200-6

Hitachi ZX350